GEOSECS Indian Ocean Description of Carbon Data Reprocessing The original database was obtained from STS/Oceanographic Data Facility, Scripps Institution of Oceanography, University of California, San Diego A-014, La Jolla, CA 92093. A full documentation of this original database is given in GEOSECS7.DOC. There are two ascii data files containing reanalyzed GEOSECS data. GEOSECS1.CSV which is a comma-delimited file containing Indian Ocean Niskin bottle data and GEOSECS2.CSV which is a comma-delimited file containing Indian Ocean large volume Gerard barrel data. The following list of parameters and the corresponding unit of measurement was selected for the purpose of studying carbon cycle in the ocean. Please note, the unit of these parameters remains the same as the original database. INDIAN OCEAN NISKIN BOTTLE DATA FIELD UNIT 1. STA station number integer 2. BOT bottle number integer 3. LAT latitude degree 4. LON longitude degree 5. DATE sampling date MoDaYr 6. PRES pressure dbar 7. DEP depth meters 8. TEMP temperature deg C 9. SAL salinity pss 10. O2 oxygen umol/kg 11. TALK total alkalinity umol/kg 12. TCO2 total CO2 umol/kg 13. PO4 phosphate umol/kg 14. SIO3 silicate umol/kg 15. NO2 nitrite umol/kg 16. NO3 nitrate umol/kg 17. THETA potential temperature deg C 18. SIGMA0 density referenced to sea surface 19. AOU apparent oxygen utilization umol/kg 20. DELC13 delta C13 permil 21. TRITIUM H3 (TU) INDIAN OCEAN LARGE VOLUME GERARD BARREL DATA FIELD UNIT 1. STA station number integer 2. BOT bottle number integer 3. LAT latitude degree 4. LON longitude degree 5. DATE sampling date MoDaYr 6. PRES pressure dbar 7. DEP depth meters 8. TEMP temperature deg C 9. SAL salinity pss 10. O2 oxygen umol/kg 11. TALK total alkalinity umol/kg 12. TCO2 total CO2 umol/kg 13. PO4 phosphate umol/kg 14. SIO3 silicate umol/kg 15. NO2 nitrite umol/kg 16. NO3 nitrate umol/kg 17. THETA potential temperature deg C 18. SIGMA0 density referenced to sea surface 19. AOU apparent oxygen utilization umol/kg 20. DELC14W delta C14 (Univ. of Wash.) permil 21. DELC14M delta C14 (Univ. Of Miami) permil To determine if the original database is consistent in quality with data obtained in recent years, comparisons of data obtained in water samples deeper than 2000 m between GEOSECS (1978) and DOE/WOCE (1995), and between GEOSECS and NOAA/OACES (1995) are made. The comparison is made only for GEOSECS stations where re-occupation was made within one degree of the station location in recent cruises. The assumption is made that deep water properties in these crossover stations should remain the same even though measurements were made about two decades apart because water masses at these depth are free of anthropogenic and other short term effects. Results of such comparison indicate that hydrographic properties , such as temperature, salinity, and oxygen concentration, are highly consistent between old and new data sets. Total alkalinity (TALK) shows some degree of scatter, but the overall average of the difference between old and new data sets is 0.8 +/- 6.0 umol/kg, which is within the precision of the GEOSECS TALK measurements. Thus, there is no need to make adjustment of GEOSECS TALK data in the Indian Ocean. However, the TCO2 values in GEOSECS database are consistently and systematically higher than those observed in DOE/WOCE and NOAA/OACES data sets. Using multi-parameter least squares linear regression method, the difference of TCO2 in these crossover stations is determined. The mean difference between GEOSECS and recent high precision measurements for these deep waters is determined to be 21.6 umol/kg, with a standard deviation of 4.1 umol/kg. Hence, the original data set has been corrected for this difference in TCO2 for the whole water column. The data set presented here represents the corrected TCO2 alone. The quality of temperature, salinity, and oxygen concentration has been checked to be acceptable, and hence no corrections are needed for these parameters. None of other parameters in the list were checked, and are assumed to be equally good. Hence no corrections are applied to the rest of parameters in the list.