08/02/2013 13:57:30 SeasaveAcq is starting up.
08/02/2013 13:57:30 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/02/2013 13:57:42 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/02/2013 13:59:13 COM5 has been reset.
08/02/2013 13:59:13 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/02/2013 13:59:13 CModemPort::Cleanup() - COM1 has been reset.
08/02/2013 13:59:13 CModemPort::Cleanup() - COM1 has been reset.
08/02/2013 13:59:13 SeasaveAcq is shutting down.

08/03/2013 12:01:08 SeasaveAcq is starting up.
08/03/2013 12:01:08 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/03/2013 12:01:20 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/03/2013 12:14:50 COM5 has been reset.
08/03/2013 12:14:51 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/03/2013 12:14:51 CModemPort::Cleanup() - COM1 has been reset.
08/03/2013 12:14:52 CModemPort::Cleanup() - COM1 has been reset.
08/03/2013 12:14:52 SeasaveAcq is shutting down.

08/03/2013 14:43:28 SeasaveAcq is starting up.
08/03/2013 14:43:29 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/03/2013 14:43:41 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/03/2013 15:30:44 COM5 has been reset.
08/03/2013 15:30:44 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/03/2013 15:30:45 CModemPort::Cleanup() - COM1 has been reset.
08/03/2013 15:30:45 CModemPort::Cleanup() - COM1 has been reset.
08/03/2013 15:30:45 SeasaveAcq is shutting down.

08/03/2013 22:48:10 SeasaveAcq is starting up.
08/03/2013 22:48:10 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/03/2013 22:48:22 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/03/2013 23:25:29 COM5 has been reset.
08/03/2013 23:25:29 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/03/2013 23:25:30 CModemPort::Cleanup() - COM1 has been reset.
08/03/2013 23:25:31 CModemPort::Cleanup() - COM1 has been reset.
08/03/2013 23:25:31 SeasaveAcq is shutting down.

08/04/2013 00:36:57 SeasaveAcq is starting up.
08/04/2013 00:36:57 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/04/2013 00:37:09 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/04/2013 01:37:05 COM5 has been reset.
08/04/2013 01:37:05 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/04/2013 01:37:06 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 01:37:06 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 01:37:06 SeasaveAcq is shutting down.

08/04/2013 03:51:49 SeasaveAcq is starting up.
08/04/2013 03:51:50 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/04/2013 03:52:02 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/04/2013 05:09:21 COM5 has been reset.
08/04/2013 05:09:22 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/04/2013 05:09:22 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 05:09:23 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 05:09:23 SeasaveAcq is shutting down.

08/04/2013 07:36:56 SeasaveAcq is starting up.
08/04/2013 07:36:56 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/04/2013 07:37:08 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/04/2013 09:23:55 COM5 has been reset.
08/04/2013 09:23:55 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/04/2013 09:23:56 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 09:23:57 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 09:23:57 SeasaveAcq is shutting down.

08/04/2013 12:04:50 SeasaveAcq is starting up.
08/04/2013 12:04:51 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/04/2013 12:05:03 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/04/2013 12:07:10 COM5 has been reset.
08/04/2013 12:07:10 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/04/2013 12:07:11 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 12:07:11 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 12:07:11 SeasaveAcq is shutting down.

08/04/2013 12:15:02 SeasaveAcq is starting up.
08/04/2013 12:15:03 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/04/2013 12:15:15 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/04/2013 14:20:06 COM5 has been reset.
08/04/2013 14:20:07 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/04/2013 14:20:07 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 14:20:08 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 14:20:08 SeasaveAcq is shutting down.

08/04/2013 18:41:58 SeasaveAcq is starting up.
08/04/2013 18:41:58 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/04/2013 18:42:10 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/04/2013 18:56:08 FFFFFFFF Unsupported modem message: FF FF F7 from SBECarousel
08/04/2013 18:56:09 FFFFFFFF Unsupported modem message: BF D9 FE from SBECarousel
08/04/2013 18:56:09 FFFFFFFF Unsupported modem message: DD FF E4 from SBECarousel
08/04/2013 18:56:10 FFFFFFFF Unsupported modem message: 62 FF FF from SBECarousel
08/04/2013 18:56:10 FFFFFFFF Unsupported modem message: DF 0F DA from SBECarousel
08/04/2013 18:56:10 FFFFFFFF Unsupported modem message: EF FA BE from SBECarousel
08/04/2013 18:56:11 FFFFFFFF Unsupported modem message: FF F9 FF from SBECarousel
08/04/2013 18:56:11 FFFFFFFF Unsupported modem message: F7 7D F4 from SBECarousel
08/04/2013 18:56:12 FFFFFFFF Unsupported modem message: EA FE FE from SBECarousel
08/04/2013 18:56:13 FFFFFFFF Unsupported modem message: F6 F8 F7 from SBECarousel
08/04/2013 18:56:13 FFFFFFFF Unsupported modem message: FF A2 FF from SBECarousel
08/04/2013 18:56:14 FFFFFFFF Unsupported modem message: 18 FF F9 from SBECarousel
08/04/2013 18:56:17 FFFFFFFF Unsupported modem message: 5A F7 77 from SBECarousel
08/04/2013 18:56:18 FFFFFFFF Unsupported modem message: BF 9F FF from SBECarousel
08/04/2013 18:56:18 FFFFFFFF Unsupported modem message: F8 FE 01 from SBECarousel
08/04/2013 18:56:19 FFFFFFFF Unsupported modem message: F4 FE FF from SBECarousel
08/04/2013 18:56:19 FFFFFFFF Unsupported modem message: C1 FB FF from SBECarousel
08/04/2013 18:56:21 FFFFFFFF Unsupported modem message: FC D8 FF from SBECarousel
08/04/2013 18:56:23 FFFFFFFF Unsupported modem message: FF FB FF from SBECarousel
08/04/2013 18:56:24 FFFFFFFF Unsupported modem message: FF FF 10 from SBECarousel
08/04/2013 18:56:24 FFFFFFFF Unsupported modem message: FF FD B2 from SBECarousel
08/04/2013 18:56:25 FFFFFFFF Unsupported modem message: F1 FE FF from SBECarousel
08/04/2013 18:56:26 FFFFFFFF Unsupported modem message: 84 82 FB from SBECarousel
08/04/2013 18:56:26 FFFFFFFF Unsupported modem message: 8F 9F FF from SBECarousel
08/04/2013 18:56:32 FFFFFFFF Unsupported modem message: F6 FF FF from SBECarousel
08/04/2013 18:57:09 FFFFFFFF Unsupported modem message: 9F E7 FF from SBECarousel
08/04/2013 18:57:10 FFFFFFFF Unsupported modem message: 9F BF AF from SBECarousel
08/04/2013 18:57:11 FFFFFFFF Unsupported modem message: FF FF FF from SBECarousel
08/04/2013 18:57:12 FFFFFFFF Unsupported modem message: EF B2 FF from SBECarousel
08/04/2013 18:57:12 FFFFFFFF Unsupported modem message: FF FF FB from SBECarousel
08/04/2013 18:57:13 FFFFFFFF Unsupported modem message: FF FF FF from SBECarousel
08/04/2013 18:57:14 FFFFFFFF Unsupported modem message: C9 FF FE from SBECarousel
08/04/2013 18:57:15 FFFFFFFF Unsupported modem message: FF FF FF from SBECarousel
08/04/2013 18:57:15 FFFFFFFF Unsupported modem message: BF FB 24 from SBECarousel
08/04/2013 18:57:16 FFFFFFFF Unsupported modem message: FF FF FE from SBECarousel
08/04/2013 18:57:18 FFFFFFFF Unsupported modem message: FF FF FF from SBECarousel
08/04/2013 18:57:21 FFFFFFFF Unsupported modem message: FF FF E7 from SBECarousel
08/04/2013 18:59:56 COM5 has been reset.
08/04/2013 18:59:56 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/04/2013 18:59:57 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 18:59:58 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 18:59:58 SeasaveAcq is shutting down.

08/04/2013 19:03:13 SeasaveAcq is starting up.
08/04/2013 19:03:13 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/04/2013 19:03:25 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/04/2013 20:44:17 COM5 has been reset.
08/04/2013 20:44:17 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/04/2013 20:44:18 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 20:44:19 CModemPort::Cleanup() - COM1 has been reset.
08/04/2013 20:44:19 SeasaveAcq is shutting down.

08/04/2013 23:22:03 SeasaveAcq is starting up.
08/04/2013 23:22:03 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/04/2013 23:22:15 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/05/2013 01:28:23 COM5 has been reset.
08/05/2013 01:28:23 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/05/2013 01:28:24 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 01:28:24 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 01:28:24 SeasaveAcq is shutting down.

08/05/2013 03:16:59 SeasaveAcq is starting up.
08/05/2013 03:17:00 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/05/2013 03:17:11 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/05/2013 05:20:11 COM5 has been reset.
08/05/2013 05:20:11 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/05/2013 05:20:12 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 05:20:12 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 05:20:12 SeasaveAcq is shutting down.

08/05/2013 07:22:45 SeasaveAcq is starting up.
08/05/2013 07:22:45 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/05/2013 07:22:57 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/05/2013 09:35:19 COM5 has been reset.
08/05/2013 09:35:20 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/05/2013 09:35:20 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 09:35:21 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 09:35:21 SeasaveAcq is shutting down.

08/05/2013 12:02:45 SeasaveAcq is starting up.
08/05/2013 12:02:46 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/05/2013 12:02:58 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/05/2013 12:03:22 COM5 has been reset.
08/05/2013 12:03:22 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/05/2013 12:03:23 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 12:03:23 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 12:03:23 SeasaveAcq is shutting down.

08/05/2013 14:05:32 SeasaveAcq is starting up.
08/05/2013 14:05:33 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/05/2013 14:05:45 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/05/2013 16:17:50 COM5 has been reset.
08/05/2013 16:17:50 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/05/2013 16:17:51 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 16:17:52 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 16:17:52 SeasaveAcq is shutting down.

08/05/2013 16:44:11 SeasaveAcq is starting up.
08/05/2013 16:44:12 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/05/2013 16:44:24 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/05/2013 16:44:36 COM5 has been reset.
08/05/2013 16:44:37 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/05/2013 16:44:37 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 16:44:38 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 16:44:38 SeasaveAcq is shutting down.

08/05/2013 20:16:06 SeasaveAcq is starting up.
08/05/2013 20:16:06 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/05/2013 20:16:18 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/05/2013 22:44:10 COM5 has been reset.
08/05/2013 22:44:10 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/05/2013 22:44:11 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 22:44:12 CModemPort::Cleanup() - COM1 has been reset.
08/05/2013 22:44:12 SeasaveAcq is shutting down.

08/06/2013 00:30:08 SeasaveAcq is starting up.
08/06/2013 00:30:09 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/06/2013 00:30:21 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/06/2013 00:30:44 COM5 has been reset.
08/06/2013 00:30:44 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/06/2013 00:30:45 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 00:30:46 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 00:30:46 SeasaveAcq is shutting down.

08/06/2013 01:47:55 SeasaveAcq is starting up.
08/06/2013 01:47:56 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/06/2013 01:48:07 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/06/2013 04:12:08 COM5 has been reset.
08/06/2013 04:12:08 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/06/2013 04:12:09 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 04:12:10 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 04:12:10 SeasaveAcq is shutting down.

08/06/2013 07:16:30 SeasaveAcq is starting up.
08/06/2013 07:16:30 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/06/2013 07:16:42 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/06/2013 09:41:09 COM5 has been reset.
08/06/2013 09:41:09 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/06/2013 09:41:10 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 09:41:11 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 09:41:11 SeasaveAcq is shutting down.

08/06/2013 13:58:03 SeasaveAcq is starting up.
08/06/2013 13:58:03 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/06/2013 13:58:15 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/06/2013 13:59:47 COM5 has been reset.
08/06/2013 13:59:47 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/06/2013 13:59:48 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 13:59:48 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 13:59:48 SeasaveAcq is shutting down.

08/06/2013 14:00:48 SeasaveAcq is starting up.
08/06/2013 14:00:48 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/06/2013 14:01:00 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/06/2013 16:15:07 COM5 has been reset.
08/06/2013 16:15:07 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/06/2013 16:15:08 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 16:15:08 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 16:15:08 SeasaveAcq is shutting down.

08/06/2013 20:25:58 SeasaveAcq is starting up.
08/06/2013 20:25:59 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/06/2013 20:26:11 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/06/2013 20:26:30 COM5 has been reset.
08/06/2013 20:26:30 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/06/2013 20:26:31 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 20:26:31 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 20:26:31 SeasaveAcq is shutting down.

08/06/2013 20:28:31 SeasaveAcq is starting up.
08/06/2013 20:28:32 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/06/2013 20:28:44 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/06/2013 22:14:06 COM5 has been reset.
08/06/2013 22:14:07 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/06/2013 22:14:07 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 22:14:08 CModemPort::Cleanup() - COM1 has been reset.
08/06/2013 22:14:08 SeasaveAcq is shutting down.

08/07/2013 01:26:49 SeasaveAcq is starting up.
08/07/2013 01:26:49 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/07/2013 01:27:01 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/07/2013 02:45:46 COM5 has been reset.
08/07/2013 02:45:47 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/07/2013 02:45:48 CModemPort::Cleanup() - COM1 has been reset.
08/07/2013 02:45:48 CModemPort::Cleanup() - COM1 has been reset.
08/07/2013 02:45:48 SeasaveAcq is shutting down.

08/07/2013 05:45:48 SeasaveAcq is starting up.
08/07/2013 05:45:48 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/07/2013 05:46:00 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/07/2013 06:53:58 COM5 has been reset.
08/07/2013 06:53:58 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/07/2013 06:53:59 CModemPort::Cleanup() - COM1 has been reset.
08/07/2013 06:53:59 CModemPort::Cleanup() - COM1 has been reset.
08/07/2013 06:53:59 SeasaveAcq is shutting down.

08/07/2013 10:57:14 SeasaveAcq is starting up.
08/07/2013 10:57:14 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/07/2013 10:57:26 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/07/2013 12:37:39 COM5 has been reset.
08/07/2013 12:37:40 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/07/2013 12:37:40 CModemPort::Cleanup() - COM1 has been reset.
08/07/2013 12:37:41 CModemPort::Cleanup() - COM1 has been reset.
08/07/2013 12:37:41 SeasaveAcq is shutting down.

08/07/2013 16:50:22 SeasaveAcq is starting up.
08/07/2013 16:50:22 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/07/2013 16:50:34 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/07/2013 18:24:50 COM5 has been reset.
08/07/2013 18:24:51 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/07/2013 18:24:51 CModemPort::Cleanup() - COM1 has been reset.
08/07/2013 18:24:52 CModemPort::Cleanup() - COM1 has been reset.
08/07/2013 18:24:52 SeasaveAcq is shutting down.

08/07/2013 21:37:33 SeasaveAcq is starting up.
08/07/2013 21:37:33 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/07/2013 21:37:45 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/07/2013 22:51:31 COM5 has been reset.
08/07/2013 22:51:31 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/07/2013 22:51:32 CModemPort::Cleanup() - COM1 has been reset.
08/07/2013 22:51:33 CModemPort::Cleanup() - COM1 has been reset.
08/07/2013 22:51:33 SeasaveAcq is shutting down.

08/08/2013 01:47:19 SeasaveAcq is starting up.
08/08/2013 01:47:20 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/08/2013 01:47:32 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/08/2013 03:24:05 COM5 has been reset.
08/08/2013 03:24:05 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/08/2013 03:24:06 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 03:24:07 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 03:24:07 SeasaveAcq is shutting down.

08/08/2013 07:29:59 SeasaveAcq is starting up.
08/08/2013 07:30:00 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/08/2013 07:30:11 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/08/2013 08:55:54 COM5 has been reset.
08/08/2013 08:55:55 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/08/2013 08:55:55 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 08:55:56 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 08:55:56 SeasaveAcq is shutting down.

08/08/2013 11:41:20 SeasaveAcq is starting up.
08/08/2013 11:41:20 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/08/2013 11:41:32 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/08/2013 13:16:31 COM5 has been reset.
08/08/2013 13:16:31 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/08/2013 13:16:32 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 13:16:32 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 13:16:32 SeasaveAcq is shutting down.

08/08/2013 16:22:06 SeasaveAcq is starting up.
08/08/2013 16:22:06 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/08/2013 16:22:18 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/08/2013 18:23:18 COM5 has been reset.
08/08/2013 18:23:19 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/08/2013 18:23:19 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 18:23:20 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 18:23:20 SeasaveAcq is shutting down.

08/08/2013 20:14:41 SeasaveAcq is starting up.
08/08/2013 20:14:42 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/08/2013 20:14:54 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/08/2013 20:19:54 COM5 has been reset.
08/08/2013 20:19:54 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/08/2013 20:19:55 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 20:19:56 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 20:19:56 SeasaveAcq is shutting down.

08/08/2013 21:31:52 SeasaveAcq is starting up.
08/08/2013 21:31:53 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/08/2013 21:32:05 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/08/2013 23:57:54 COM5 has been reset.
08/08/2013 23:57:54 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/08/2013 23:57:55 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 23:57:56 CModemPort::Cleanup() - COM1 has been reset.
08/08/2013 23:57:56 SeasaveAcq is shutting down.

08/09/2013 03:07:29 SeasaveAcq is starting up.
08/09/2013 03:07:29 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/09/2013 03:07:41 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/09/2013 05:41:38 COM5 has been reset.
08/09/2013 05:41:39 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/09/2013 05:41:39 CModemPort::Cleanup() - COM1 has been reset.
08/09/2013 05:41:40 CModemPort::Cleanup() - COM1 has been reset.
08/09/2013 05:41:40 SeasaveAcq is shutting down.

08/09/2013 08:48:47 SeasaveAcq is starting up.
08/09/2013 08:48:47 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/09/2013 08:48:59 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/09/2013 11:42:44 COM5 has been reset.
08/09/2013 11:42:44 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/09/2013 11:42:45 CModemPort::Cleanup() - COM1 has been reset.
08/09/2013 11:42:45 CModemPort::Cleanup() - COM1 has been reset.
08/09/2013 11:42:45 SeasaveAcq is shutting down.

08/09/2013 15:51:11 SeasaveAcq is starting up.
08/09/2013 15:51:11 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/09/2013 15:51:23 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/09/2013 18:34:08 COM5 has been reset.
08/09/2013 18:34:08 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/09/2013 18:34:09 CModemPort::Cleanup() - COM1 has been reset.
08/09/2013 18:34:09 CModemPort::Cleanup() - COM1 has been reset.
08/09/2013 18:34:09 SeasaveAcq is shutting down.

08/09/2013 22:46:37 SeasaveAcq is starting up.
08/09/2013 22:46:38 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/09/2013 22:46:49 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/09/2013 22:50:22 COM5 has been reset.
08/09/2013 22:50:23 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/09/2013 22:50:23 ReadFile failed to read from pipe.
08/09/2013 22:50:23 CPublisherThread::ThreadFunction: 'send()' returned 0. Error #232 - The pipe is being closed.

08/09/2013 22:50:23 CModemPort::Cleanup() - COM1 has been reset.
08/09/2013 22:50:23 CModemPort::Cleanup() - COM1 has been reset.
08/09/2013 22:50:23 SeasaveAcq is shutting down.

08/09/2013 22:50:42 SeasaveAcq is starting up.
08/09/2013 22:50:43 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/09/2013 22:50:54 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/10/2013 01:34:50 COM5 has been reset.
08/10/2013 01:34:50 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/10/2013 01:34:51 CModemPort::Cleanup() - COM1 has been reset.
08/10/2013 01:34:51 CModemPort::Cleanup() - COM1 has been reset.
08/10/2013 01:34:51 SeasaveAcq is shutting down.

08/10/2013 04:49:47 SeasaveAcq is starting up.
08/10/2013 04:49:48 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/10/2013 04:50:00 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/10/2013 07:47:51 COM5 has been reset.
08/10/2013 07:47:51 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/10/2013 07:47:52 CModemPort::Cleanup() - COM1 has been reset.
08/10/2013 07:47:53 CModemPort::Cleanup() - COM1 has been reset.
08/10/2013 07:47:53 SeasaveAcq is shutting down.

08/10/2013 10:45:52 SeasaveAcq is starting up.
08/10/2013 10:45:53 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/10/2013 10:46:05 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/10/2013 14:04:50 COM5 has been reset.
08/10/2013 14:04:50 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/10/2013 14:04:51 CModemPort::Cleanup() - COM1 has been reset.
08/10/2013 14:04:52 CModemPort::Cleanup() - COM1 has been reset.
08/10/2013 14:04:52 SeasaveAcq is shutting down.

08/10/2013 17:58:39 SeasaveAcq is starting up.
08/10/2013 17:58:40 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/10/2013 17:58:52 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/10/2013 21:05:42 COM5 has been reset.
08/10/2013 21:05:43 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/10/2013 21:05:44 CModemPort::Cleanup() - COM1 has been reset.
08/10/2013 21:05:44 CModemPort::Cleanup() - COM1 has been reset.
08/10/2013 21:05:44 SeasaveAcq is shutting down.

08/11/2013 01:25:59 SeasaveAcq is starting up.
08/11/2013 01:25:59 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/11/2013 01:26:11 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/11/2013 02:00:21 COM5 has been reset.
08/11/2013 02:00:21 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/11/2013 02:00:22 CModemPort::Cleanup() - COM1 has been reset.
08/11/2013 02:00:22 CModemPort::Cleanup() - COM1 has been reset.
08/11/2013 02:00:22 SeasaveAcq is shutting down.

08/11/2013 02:14:48 SeasaveAcq is starting up.
08/11/2013 02:14:49 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/11/2013 02:15:01 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/11/2013 05:23:36 COM5 has been reset.
08/11/2013 05:23:37 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/11/2013 05:23:37 CModemPort::Cleanup() - COM1 has been reset.
08/11/2013 05:23:38 CModemPort::Cleanup() - COM1 has been reset.
08/11/2013 05:23:38 SeasaveAcq is shutting down.

08/11/2013 08:24:36 SeasaveAcq is starting up.
08/11/2013 08:24:36 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/11/2013 08:24:48 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/11/2013 11:36:13 COM5 has been reset.
08/11/2013 11:36:13 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/11/2013 11:36:14 CModemPort::Cleanup() - COM1 has been reset.
08/11/2013 11:36:14 CModemPort::Cleanup() - COM1 has been reset.
08/11/2013 11:36:14 SeasaveAcq is shutting down.

08/11/2013 14:43:26 SeasaveAcq is starting up.
08/11/2013 14:43:27 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/11/2013 14:43:39 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/11/2013 17:55:02 COM5 has been reset.
08/11/2013 17:55:03 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/11/2013 17:55:03 CModemPort::Cleanup() - COM1 has been reset.
08/11/2013 17:55:04 CModemPort::Cleanup() - COM1 has been reset.
08/11/2013 17:55:04 SeasaveAcq is shutting down.

08/11/2013 22:03:19 SeasaveAcq is starting up.
08/11/2013 22:03:19 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/11/2013 22:03:31 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/12/2013 01:24:09 COM5 has been reset.
08/12/2013 01:24:09 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/12/2013 01:24:10 CModemPort::Cleanup() - COM1 has been reset.
08/12/2013 01:24:11 CModemPort::Cleanup() - COM1 has been reset.
08/12/2013 01:24:11 SeasaveAcq is shutting down.

08/12/2013 04:21:20 SeasaveAcq is starting up.
08/12/2013 04:21:21 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/12/2013 04:21:32 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/12/2013 07:34:16 COM5 has been reset.
08/12/2013 07:34:16 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/12/2013 07:34:17 CModemPort::Cleanup() - COM1 has been reset.
08/12/2013 07:34:18 CModemPort::Cleanup() - COM1 has been reset.
08/12/2013 07:34:18 SeasaveAcq is shutting down.

08/12/2013 11:13:16 SeasaveAcq is starting up.
08/12/2013 11:13:16 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/12/2013 11:13:28 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/12/2013 15:00:22 COM5 has been reset.
08/12/2013 15:00:22 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/12/2013 15:00:23 CModemPort::Cleanup() - COM1 has been reset.
08/12/2013 15:00:23 CModemPort::Cleanup() - COM1 has been reset.
08/12/2013 15:00:23 SeasaveAcq is shutting down.

08/12/2013 18:58:53 SeasaveAcq is starting up.
08/12/2013 18:58:53 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/12/2013 18:58:59 Failed to initialize deck unit
08/12/2013 18:58:59 COM5 has been reset.
08/12/2013 18:59:00 CDataAcquisitionThread::Stop() took approximately    0.7 seconds. Exit code 00000000.
08/12/2013 18:59:01 SeasaveAcq is shutting down.

08/12/2013 18:59:19 SeasaveAcq is starting up.
08/12/2013 18:59:20 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/12/2013 18:59:32 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/12/2013 18:59:43 COM5 has been reset.
08/12/2013 18:59:44 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/12/2013 18:59:44 CPublisherThread::ThreadFunction: 'send()' returned 0. Error #232 - The pipe is being closed.

08/12/2013 18:59:44 CModemPort::Cleanup() - COM1 has been reset.
08/12/2013 18:59:44 CModemPort::Cleanup() - COM1 has been reset.
08/12/2013 18:59:44 SeasaveAcq is shutting down.

08/12/2013 19:00:15 SeasaveAcq is starting up.
08/12/2013 19:00:16 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/12/2013 19:00:28 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/12/2013 22:37:57 COM5 has been reset.
08/12/2013 22:37:57 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/12/2013 22:37:58 CModemPort::Cleanup() - COM1 has been reset.
08/12/2013 22:37:58 CModemPort::Cleanup() - COM1 has been reset.
08/12/2013 22:37:58 SeasaveAcq is shutting down.

08/13/2013 01:41:06 SeasaveAcq is starting up.
08/13/2013 01:41:06 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/13/2013 01:41:18 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/13/2013 04:54:35 COM5 has been reset.
08/13/2013 04:54:35 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/13/2013 04:54:35 CModemPort::Cleanup() - COM1 has been reset.
08/13/2013 04:54:36 CModemPort::Cleanup() - COM1 has been reset.
08/13/2013 04:54:36 SeasaveAcq is shutting down.

08/13/2013 07:44:13 SeasaveAcq is starting up.
08/13/2013 07:44:13 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/13/2013 07:44:25 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/13/2013 10:57:38 COM5 has been reset.
08/13/2013 10:57:39 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/13/2013 10:57:39 CModemPort::Cleanup() - COM1 has been reset.
08/13/2013 10:57:40 CModemPort::Cleanup() - COM1 has been reset.
08/13/2013 10:57:40 SeasaveAcq is shutting down.

08/13/2013 15:10:12 SeasaveAcq is starting up.
08/13/2013 15:10:13 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/13/2013 15:10:25 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/13/2013 18:32:26 COM5 has been reset.
08/13/2013 18:32:26 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/13/2013 18:32:27 CModemPort::Cleanup() - COM1 has been reset.
08/13/2013 18:32:28 CModemPort::Cleanup() - COM1 has been reset.
08/13/2013 18:32:28 SeasaveAcq is shutting down.

08/13/2013 22:02:27 SeasaveAcq is starting up.
08/13/2013 22:02:27 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/13/2013 22:02:39 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/13/2013 22:11:16 COM5 has been reset.
08/13/2013 22:11:16 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/13/2013 22:11:17 CModemPort::Cleanup() - COM1 has been reset.
08/13/2013 22:11:18 CModemPort::Cleanup() - COM1 has been reset.
08/13/2013 22:11:18 SeasaveAcq is shutting down.

08/13/2013 22:20:16 SeasaveAcq is starting up.
08/13/2013 22:20:16 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/13/2013 22:20:28 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/13/2013 22:22:20 COM5 has been reset.
08/13/2013 22:22:20 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/13/2013 22:22:21 CModemPort::Cleanup() - COM1 has been reset.
08/13/2013 22:22:22 CModemPort::Cleanup() - COM1 has been reset.
08/13/2013 22:22:22 SeasaveAcq is shutting down.

08/13/2013 22:22:58 SeasaveAcq is starting up.
08/13/2013 22:22:59 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/13/2013 22:23:11 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/14/2013 01:20:43 COM5 has been reset.
08/14/2013 01:20:43 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/14/2013 01:20:44 CModemPort::Cleanup() - COM1 has been reset.
08/14/2013 01:20:44 CModemPort::Cleanup() - COM1 has been reset.
08/14/2013 01:20:44 SeasaveAcq is shutting down.

08/14/2013 04:24:09 SeasaveAcq is starting up.
08/14/2013 04:24:09 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/14/2013 04:24:21 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/14/2013 07:24:04 COM5 has been reset.
08/14/2013 07:24:04 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/14/2013 07:24:05 CModemPort::Cleanup() - COM1 has been reset.
08/14/2013 07:24:06 CModemPort::Cleanup() - COM1 has been reset.
08/14/2013 07:24:06 SeasaveAcq is shutting down.

08/14/2013 10:25:35 SeasaveAcq is starting up.
08/14/2013 10:25:36 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/14/2013 10:25:48 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/14/2013 14:04:51 COM5 has been reset.
08/14/2013 14:04:51 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/14/2013 14:04:52 CModemPort::Cleanup() - COM1 has been reset.
08/14/2013 14:04:52 CModemPort::Cleanup() - COM1 has been reset.
08/14/2013 14:04:52 SeasaveAcq is shutting down.

08/14/2013 17:26:50 SeasaveAcq is starting up.
08/14/2013 17:26:50 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/14/2013 17:27:02 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/14/2013 17:28:07 COM5 has been reset.
08/14/2013 17:28:08 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/14/2013 17:28:08 CModemPort::Cleanup() - COM1 has been reset.
08/14/2013 17:28:09 CModemPort::Cleanup() - COM1 has been reset.
08/14/2013 17:28:09 SeasaveAcq is shutting down.

08/14/2013 18:11:42 SeasaveAcq is starting up.
08/14/2013 18:11:43 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/14/2013 18:11:55 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/14/2013 21:19:06 COM5 has been reset.
08/14/2013 21:19:07 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/14/2013 21:19:07 CModemPort::Cleanup() - COM1 has been reset.
08/14/2013 21:19:08 CModemPort::Cleanup() - COM1 has been reset.
08/14/2013 21:19:08 SeasaveAcq is shutting down.

08/15/2013 01:50:57 SeasaveAcq is starting up.
08/15/2013 01:50:58 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/15/2013 01:51:10 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/15/2013 03:54:50 COM5 has been reset.
08/15/2013 03:54:51 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/15/2013 03:54:51 CModemPort::Cleanup() - COM1 has been reset.
08/15/2013 03:54:52 CModemPort::Cleanup() - COM1 has been reset.
08/15/2013 03:54:52 SeasaveAcq is shutting down.

08/15/2013 06:55:34 SeasaveAcq is starting up.
08/15/2013 06:55:34 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/15/2013 06:55:46 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/15/2013 09:13:47 COM5 has been reset.
08/15/2013 09:13:47 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/15/2013 09:13:48 CModemPort::Cleanup() - COM1 has been reset.
08/15/2013 09:13:48 CModemPort::Cleanup() - COM1 has been reset.
08/15/2013 09:13:48 SeasaveAcq is shutting down.

08/15/2013 12:12:44 SeasaveAcq is starting up.
08/15/2013 12:12:45 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/15/2013 12:12:57 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/15/2013 15:38:18 COM5 has been reset.
08/15/2013 15:38:18 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/15/2013 15:38:19 CModemPort::Cleanup() - COM1 has been reset.
08/15/2013 15:38:19 CModemPort::Cleanup() - COM1 has been reset.
08/15/2013 15:38:19 SeasaveAcq is shutting down.

08/15/2013 19:41:26 SeasaveAcq is starting up.
08/15/2013 19:41:26 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/15/2013 19:41:38 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/15/2013 23:08:58 COM5 has been reset.
08/15/2013 23:08:58 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/15/2013 23:08:59 CModemPort::Cleanup() - COM1 has been reset.
08/15/2013 23:09:00 CModemPort::Cleanup() - COM1 has been reset.
08/15/2013 23:09:00 SeasaveAcq is shutting down.

08/16/2013 02:14:57 SeasaveAcq is starting up.
08/16/2013 02:14:57 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/16/2013 02:15:09 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/16/2013 05:37:50 COM5 has been reset.
08/16/2013 05:37:50 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/16/2013 05:37:51 CModemPort::Cleanup() - COM1 has been reset.
08/16/2013 05:37:51 CModemPort::Cleanup() - COM1 has been reset.
08/16/2013 05:37:51 SeasaveAcq is shutting down.

08/16/2013 09:30:45 SeasaveAcq is starting up.
08/16/2013 09:30:45 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/16/2013 09:30:57 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/16/2013 13:01:29 COM5 has been reset.
08/16/2013 13:01:29 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/16/2013 13:01:30 CModemPort::Cleanup() - COM1 has been reset.
08/16/2013 13:01:30 CModemPort::Cleanup() - COM1 has been reset.
08/16/2013 13:01:30 SeasaveAcq is shutting down.

08/16/2013 17:27:10 SeasaveAcq is starting up.
08/16/2013 17:27:10 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/16/2013 17:27:22 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/16/2013 20:56:19 COM5 has been reset.
08/16/2013 20:56:20 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/16/2013 20:56:21 CModemPort::Cleanup() - COM1 has been reset.
08/16/2013 20:56:21 CModemPort::Cleanup() - COM1 has been reset.
08/16/2013 20:56:21 SeasaveAcq is shutting down.

08/17/2013 00:04:00 SeasaveAcq is starting up.
08/17/2013 00:04:01 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/17/2013 00:04:13 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/17/2013 03:13:35 COM5 has been reset.
08/17/2013 03:13:35 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/17/2013 03:13:36 CModemPort::Cleanup() - COM1 has been reset.
08/17/2013 03:13:36 CModemPort::Cleanup() - COM1 has been reset.
08/17/2013 03:13:36 SeasaveAcq is shutting down.

08/17/2013 06:16:32 SeasaveAcq is starting up.
08/17/2013 06:16:32 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/17/2013 06:16:44 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/17/2013 09:58:48 COM5 has been reset.
08/17/2013 09:58:48 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/17/2013 09:58:49 CModemPort::Cleanup() - COM1 has been reset.
08/17/2013 09:58:50 CModemPort::Cleanup() - COM1 has been reset.
08/17/2013 09:58:50 SeasaveAcq is shutting down.

08/17/2013 14:01:48 SeasaveAcq is starting up.
08/17/2013 14:01:48 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/17/2013 14:02:00 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/17/2013 17:47:22 COM5 has been reset.
08/17/2013 17:47:22 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/17/2013 17:47:23 CModemPort::Cleanup() - COM1 has been reset.
08/17/2013 17:47:24 CModemPort::Cleanup() - COM1 has been reset.
08/17/2013 17:47:24 SeasaveAcq is shutting down.

08/17/2013 21:48:06 SeasaveAcq is starting up.
08/17/2013 21:48:06 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/17/2013 21:48:18 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/18/2013 00:47:20 COM5 has been reset.
08/18/2013 00:47:21 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/18/2013 00:47:21 CModemPort::Cleanup() - COM1 has been reset.
08/18/2013 00:47:22 CModemPort::Cleanup() - COM1 has been reset.
08/18/2013 00:47:22 SeasaveAcq is shutting down.

08/18/2013 03:47:49 SeasaveAcq is starting up.
08/18/2013 03:47:49 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/18/2013 03:48:01 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/18/2013 07:29:26 COM5 has been reset.
08/18/2013 07:29:26 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/18/2013 07:29:27 CModemPort::Cleanup() - COM1 has been reset.
08/18/2013 07:29:27 CModemPort::Cleanup() - COM1 has been reset.
08/18/2013 07:29:27 SeasaveAcq is shutting down.

08/18/2013 10:29:11 SeasaveAcq is starting up.
08/18/2013 10:29:12 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/18/2013 10:29:23 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/18/2013 14:12:41 COM5 has been reset.
08/18/2013 14:12:41 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/18/2013 14:12:42 CModemPort::Cleanup() - COM1 has been reset.
08/18/2013 14:12:43 CModemPort::Cleanup() - COM1 has been reset.
08/18/2013 14:12:43 SeasaveAcq is shutting down.

08/18/2013 18:35:52 SeasaveAcq is starting up.
08/18/2013 18:35:52 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/18/2013 18:36:04 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/18/2013 22:17:02 COM5 has been reset.
08/18/2013 22:17:02 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/18/2013 22:17:03 CModemPort::Cleanup() - COM1 has been reset.
08/18/2013 22:17:04 CModemPort::Cleanup() - COM1 has been reset.
08/18/2013 22:17:04 SeasaveAcq is shutting down.

08/19/2013 01:46:12 SeasaveAcq is starting up.
08/19/2013 01:46:13 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/19/2013 01:46:24 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/19/2013 05:24:14 COM5 has been reset.
08/19/2013 05:24:15 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/19/2013 05:24:15 CModemPort::Cleanup() - COM1 has been reset.
08/19/2013 05:24:16 CModemPort::Cleanup() - COM1 has been reset.
08/19/2013 05:24:16 SeasaveAcq is shutting down.

08/19/2013 09:38:49 SeasaveAcq is starting up.
08/19/2013 09:38:50 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/19/2013 09:39:01 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/19/2013 13:33:23 COM5 has been reset.
08/19/2013 13:33:23 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/19/2013 13:33:24 CModemPort::Cleanup() - COM1 has been reset.
08/19/2013 13:33:25 CModemPort::Cleanup() - COM1 has been reset.
08/19/2013 13:33:25 SeasaveAcq is shutting down.

08/19/2013 18:21:48 SeasaveAcq is starting up.
08/19/2013 18:21:48 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/19/2013 18:22:00 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/19/2013 22:10:55 COM5 has been reset.
08/19/2013 22:10:55 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/19/2013 22:10:56 CModemPort::Cleanup() - COM1 has been reset.
08/19/2013 22:10:57 CModemPort::Cleanup() - COM1 has been reset.
08/19/2013 22:10:57 SeasaveAcq is shutting down.

08/20/2013 01:33:30 SeasaveAcq is starting up.
08/20/2013 01:33:30 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/20/2013 01:33:42 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/20/2013 05:22:29 COM5 has been reset.
08/20/2013 05:22:29 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/20/2013 05:22:30 CModemPort::Cleanup() - COM1 has been reset.
08/20/2013 05:22:30 CModemPort::Cleanup() - COM1 has been reset.
08/20/2013 05:22:30 SeasaveAcq is shutting down.

08/20/2013 08:36:45 SeasaveAcq is starting up.
08/20/2013 08:36:46 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/20/2013 08:36:58 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/20/2013 12:27:57 COM5 has been reset.
08/20/2013 12:27:57 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/20/2013 12:27:58 CModemPort::Cleanup() - COM1 has been reset.
08/20/2013 12:27:59 CModemPort::Cleanup() - COM1 has been reset.
08/20/2013 12:27:59 SeasaveAcq is shutting down.

08/20/2013 16:46:43 SeasaveAcq is starting up.
08/20/2013 16:46:44 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/20/2013 16:46:56 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/20/2013 20:27:18 COM5 has been reset.
08/20/2013 20:27:18 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/20/2013 20:27:19 CModemPort::Cleanup() - COM1 has been reset.
08/20/2013 20:27:20 CModemPort::Cleanup() - COM1 has been reset.
08/20/2013 20:27:20 SeasaveAcq is shutting down.

08/21/2013 00:56:48 SeasaveAcq is starting up.
08/21/2013 00:56:49 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/21/2013 00:57:01 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/21/2013 03:41:45 COM5 has been reset.
08/21/2013 03:41:46 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/21/2013 03:41:46 CModemPort::Cleanup() - COM1 has been reset.
08/21/2013 03:41:47 CModemPort::Cleanup() - COM1 has been reset.
08/21/2013 03:41:47 SeasaveAcq is shutting down.

08/21/2013 08:01:16 SeasaveAcq is starting up.
08/21/2013 08:01:16 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/21/2013 08:01:28 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/21/2013 11:44:26 COM5 has been reset.
08/21/2013 11:44:26 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/21/2013 11:44:27 CModemPort::Cleanup() - COM1 has been reset.
08/21/2013 11:44:27 CModemPort::Cleanup() - COM1 has been reset.
08/21/2013 11:44:27 SeasaveAcq is shutting down.

08/21/2013 15:58:51 SeasaveAcq is starting up.
08/21/2013 15:58:52 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/21/2013 15:59:04 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/21/2013 19:44:28 COM5 has been reset.
08/21/2013 19:44:29 CDataAcquisitionThread::Stop() took approximately    0.3 seconds. Exit code 00000000.
08/21/2013 19:44:29 CModemPort::Cleanup() - COM1 has been reset.
08/21/2013 19:44:30 CModemPort::Cleanup() - COM1 has been reset.
08/21/2013 19:44:30 SeasaveAcq is shutting down.

08/21/2013 23:04:00 SeasaveAcq is starting up.
08/21/2013 23:04:01 CRS232::Initialize(): port = COM5, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/21/2013 23:04:13 CModemPort::InitializePort(): port = COM1, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2013 02:53:17 COM5 has been reset.
08/22/2013 02:53:17 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/22/2013 02:53:18 CModemPort::Cleanup() - COM1 has been reset.
08/22/2013 02:53:19 CModemPort::Cleanup() - COM1 has been reset.
08/22/2013 02:53:19 SeasaveAcq is shutting down.